Datamax A-Class A-4310, Руководство программиста

Страница: 88 / 302

Extended System-Level Command Functions
72 Class Series Programmer’s Manual
(MCC) Module Command –
This command adjusts the size of Flash module on the optional
Expansion Card according to the table below (see Appendix K for appropriate module details):
Value Module Command Units / Interpretation
Z xx xx
=
Size: 1 – 7 Mbytes. This is the amount to be allocated to Module
Z
; any remaining
memory will be allocated to Module
F
.
G xx xx
=
Size: 1 – 56, in 128 Kbytes blocks. This is the amount to be allocated to Module
G
;
any remaining memory will be allocated to Module
X
.
Table 5-4: Module Command
(ML) Maximum (Label) Length
– See
<STX>M
for command details .
(MM) Menu Mode –
This command sets the menu access level of the printer – where User is a
basic listing of menu settings and controls, and Advanced is a full menu listing.
(MT) Media Type –
This command selects the printing method: Direct Thermal for use with heat
sensitive media or Thermal Transfer for use with media requiring a ribbon to create an image.
(For non-display models also see the
<STX>KD
command.)
(MV) Mark Value
– This command sets threshold value for the reflective media sensor’s ‘mark’
parameter.