69
Installation
Read all of the safety instructions in this manual
carefully before installing the energizer.
Selecting a site for the installation
Follow these guidelines when selecting a site
for your installation.
Select a site where:
•
a good earth can be obtained
•
children and animals cannot interfere with
the installation
•
the installation can be accessed easily
Make sure the energizer is installed:
•
adjacent to the electric fence
•
preferably in the middle of the electric
fence system
•
close to a mains/line power outlet (if using
a mains/line supply to power the
energizer)
•
at least 1 m (3’) away from and not
directly above the battery (if using a
battery to power the energizer)
If your installation is outside, also make sure
that it is:
•
on firm ground away from flooding
•
inside a protective fence, if required.
Installing the energizer inside
The energizer must be installed inside when
being powered by the mains/line power supply.
WARNING!
-
Do not use a mains/line power extension
lead.
-
Allow 25 mm (1”) of clear space around
the power adaptor.
To install the energizer inside:
1
Select a suitable installation site. See
Selecting a site for the installation
on page
2
Mount the energizer on a wall. Use the
template printed on the back cover of this
manual, if required.
3
Connect the Fence earth terminal (green)
to the earthing system.
4
Connect the Fence output terminal (red) to
the fence.
5
Connect the energizer to the mains/line
power using the mains/line power
adaptor.
Note:
If the energizer is being installed inside,
it may be powered by a battery, as an
alternative to the mains/line power supply.
Содержание 1000/X1/401
Страница 136: ...136 ...