Dataman 48UXP Скачать руководство пользователя страница 20

Страница: 20 / 72

LED Display

The Dataman-48UXP has a three LED display to indicate the

status of the socket. Read this section carefully to avoid damage to

chips.

Warning: Do not insert or remove a chip from a

socket while the yellow LED is on (Busy)!

Green LED on (Good)

The last operation result passed.

Yellow LED on (Busy)

The socket is busy; do not remove or

insert the chip on the ZIF socket

before green LED or red LED on.

Red LED on (Error)

The last operation resulted in failure.

Flashing LED, 5Hz frequency. This only applies to mass production

mode, the chip pass the program and verify cycle and waiting for

operator to remove the chip and insert a new chip.

File Commands

Save Buffer to File

Menu

File / Save Buffer

Hot

key

Alt-S

This option is used to save the memory buffer to a file on the

hard disk. Select a file (to overwrite!) using the mouse, or type

the file name in the box provided. You can also type in a file

spec. (e.g. *.hex) at the Name prompt. This will display all the

files of the specified type, and you can then select the required

file to overwrite.

Содержание 48UXP









































































Результаты поиска

Содержание 48UXP

Отзывы:

Dataman 48UXP, Руководство пользователя, Страница: 20 / 72

Результаты поиска

Содержание 48UXP

Отзывы: