Skorpio Handheld Information
1
APPEND CARRIAGE RETU RN TO BARCODE SCAN
The default setting of the Skorpio X3 includes BOTH the Carriage Return [CR] and a Line Feed [LF]. The
[LF] will interfere with proper scanning output. You must remove the [LF] following the steps below.
1.
In Control Panel, select Decoding.
2.
Tap Configure on the Menu and select Decoding Options.
3.
Using the Right Arrow on the Menu, tap the Arrow until the Formatting page is displayed.
4.
Select the Label Suffix radio button (NOT Prefix).
5.
In the Edit Label Suffix window should be displayed [CR][LF].
6.
Tap the window after the last character [LF] and press the BKSP (backspace) key to delete the
[LF] only. The [CR] should be the only remaining Suffix. If there is no Suffix shown, select [CR]
from the Add special dropdown listing and press Add.
7.
Once only the Label Suffix [CR] is displayed, select “OK” at the top of the screen.
CONNECTING WIRELESSLY
1.
Tap the Start button in the lower left corner of the system tray.
2.
Select Settings, then Control Panel.
3.
Scroll the window if necessary and double tap the SCU Wi-Fi icon.
4.
Select The Profile Tab.
5.
Select Scan.
6.
Select your Wireless Internet and then tap Configure.
7.
It may ask you create a new profile. Select Yes.
8.
Enter in security as needed.
9.
Once back on the Profile Tab, tap the Commit button.
10.
Click the Main tab.
11.
Click on the Box next to Active profile and select the profile you just created.
12.
You can now switch to the Status tab. IT will show a Device IP Address and a Signal Strength if
you are properly connected to the Wi-Fi.
13.
Select OK to save your new settings.
MICROSOFT ACTIVE SYN C INSTALLATION (FOR WINDOWS XP)
1.
Locate a copy of the latest version of Active Sync for your computer system. The correct version
is available from Microsoft’s WEB site or a copy is included in your download. Version 4.5 is the
latest from Microsoft as of this printing.
2.
Look for the installation file (i.e. activesync_setup.msi) and run it. We recommend that you
follow the installation instructions and accept the standard default settings during your install.
3.
Leave Active Sync running to install and connect your handheld computer.
NOTE: Some users may use a single PC to connect multiple handheld computers. If this is the case, it is
best to setup your PC to recognize each handheld as a “Guest”. This avoids having Active Sync loading
shared data from your Outlook and other PC applications. To set all connected handhelds as a Guest,
please double-click and run the provided “GuestOnly.reg” file. It will instantly update your system for
future connections.