Datalogic Single Slot Dock Ethernet Module Скачать руководство пользователя страница 2

 

 

ETHERNET CONNECTION

 

 

Connect the Ethernet port on the Module to an Ethernet hub or a port on the host device. 
 
Press the selection switch until the module selection LED is on. 
 
Insert the Datalogic mobile computer into the dock.

 

 

 

 

Figure 3 – Ethernet Connection 

 

Key: 

A) 

Single Slot Dock with Ethernet Module 

B) 

UTP CAT 5E cable (recommended use) 

C)  94ACC1381 Power Adapter 

D) Ethernet 

hub 

 

LED INDICATOR

 

 

Color Status 

Off 

USB mode selected 

Yellow 

Ethernet mode selected 

Yellow Blinking 

Ethernet activity 

 

 

TECHNICAL FEATURES 

 

Communication Features 

Interface 

Ethernet 10/100 Base T 

Physical Features 

Dimensions 

110 x 140 x 36 mm 
4,3 x 5,5 x 1,4 in 

Weight (without connection 
cables) 

185 g / 6,5 oz 

Indicators 

Module selection LED 
Ethernet Link LED (yellow) 
Ethernet Speed LED (green) 

Environmental Features 

Working temperature 

-10° to +50°C / 32° to 122°F  

Storage temperature 

-20° to +70°C / -4° to 158°F 

Humidity 

95% without condensation 

Electrostatic discharge 
EN 61000-4-2 

4 KV contact / 8 KV air 

 
 

FCC COMPLIANCE

 

 
This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, if 
not installed and used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a residential area is likely 
to cause harmful interference in which case the user will be required to correct the interference 
at his own expense. 
 
Modifications or changes to this equipment without the expressed written approval of Datalogic 
could void the authority to use the equipment. 
This device complies with PART 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference which may cause undesired operation. 
 

 

C

Отзывы: