Quick Reference Guide
1
Installation
The QuickScan
®
QS6500BT linear imager is easy to install and
use. The following figure shows the steps to perform an installa-
tion. Turn off the host computer before connection. Consult the
host terminal’s manual if necessary.
1. Lift the cable retainer.
2. Connect the interface (I/F) cable to the Base Station.
3. Connect the power cord to the Base Station.
4. Latch the cable retainer to secure the cables.
5. Route both cables through the notch.
6. Connect the I/F cable to the terminal’s communication port.
7. Connect the AC adapter to the wall outlet.
NOTE
For Power Off Terminal application with standard USB inter-
face, attach to USB 1.0, 1.1 or 2.0 host device ONLY.
2
3
Base
Station
Cable
Routing
Power
I/F
4
5
7
9
8
1
6
