Datalogic QuickScan QD2590, Краткое руководство пользователя

Страница: 19 / 48

Configuring the Interface
QUICK REFERENCE GUIDE
9
tional information associated with each interface, proceed
to the corresponding chapter in the QuickScan™ QD2590
PRG.
CONFIGURING THE INTERFACE
Scan the appropriate programming bar code to select the
interface type for your system.
NOTE: Unlike some other programming fea-
tures and options, interface selections
require that you scan only one programming
bar code label. DO NOT scan an ENTER/EXIT
bar code prior to scanning an interface selec-
tion bar code.
Some interfaces require the scanner to start
in the disabled state when powered up. If
additional scanner configuration is desired
while in this state, pull the trigger and hold
for 5 seconds. The scanner will change to a
state that allows programming with bar
codes.