Datalogic QuickScan I QD21 1 Series, Руководство по продукции

Страница: 280 / 360

Enter/Exit Programming Mode
270 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
BT Pin Code
After enabling Security Mode (see " BT Security Mode" on page 269 ), specify
whether you want to set a 4-digit or a 16-digit PIN Code. See page 310 for
detailed information and examples for setting this feature.
Select PIN Code Length
Select 4-character BT PIN Code
Select 16-character BT PIN Code
Set PIN Code
Determine the desired characters for the PIN code, then convert to hexadecimal
using the ASCII Chart on the inside back cover of this manual. See page 310 for
detailed information and examples for setting this feature.
Set 4-character BT Pin Code
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the desired bar
code , followed by the digits from the Alphanumeric char-
acters in
Appendix D
. Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Set 16-character BT PIN Code
CANCEL
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
DEFAULT
DEFAULT
31323334 = Default PIN Code is 1234