Datalogic PowerScan Series, Руководство по продукции

Страница: 269 / 411

ARROW KEYS MODE (4-KEY MODELS ONLY) ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
253
Arrow Keys Mode (4-key models only)
Configure the Arrow Keys functionality type. Two options are available:
Function Keys Action Select mode: When in this mode, arrow keys are used to select
one of the 3 possible actions associated to the Function Keys. To associate actions to the
Function keys, see
Configure Actions for Function Keys, starting on page 256
.
String Association Mode: When in this mode, each one of the arrow keys can be pro -
grammed to display and transmit a pre-defined string.
Arrow Up String (4-key models only)
Associate a pre-defined string to the Arrow Up key
$CDIAC00
SHIFT Mode

STRING Mode
$CDIAC01
Set string for Arrow Up Key
$CDAUS
To configure this feature, scan the ENTER/EXIT PRO -
GRAMMING MODE bar code above, then the bar code
at left. Define the label string by further scanning 32
digits from the Alphanumeric characters in
Appendix G, Keypad .
The digits must be the hexadecimal ASCII represen -
tation of the desired characters; if less than the
expected string of 16 characters are selected, scan
the ENTER/EXIT bar code to terminate the string.
End by scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

0x3D000000000000000000000000000000