Datalogic PowerScan 9501-AR Series, Руководство по продукции

Страница: 240 / 362

Enter/Exit Programming Mode
230 PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
Bluetooth HID Variable PIN Code
Specifies the selection available for Static or Variable Pin Code, when Blue-
tooth HID profile is configured.
Some Bluetooth drivers on the Host (such as WIDCOMM and BlueSoleil 8)
require a Variable PIN Code. When attempting connection, the application
presents a window that includes a PIN Code which is to be input using the
PowerScan BT9501-AR. Scan the bar code "Variable PIN Code" below, then
use the host computer’s Bluetooth manager to “Discover new devices” and
select "Datalogic Scanner." Use a text editor to see incoming data on the
port designated by the computer's Bluetooth manager.
If you receive an error message, it may be necessary to disable
security on the device.
When you hear the beep and see the Green LED blinking indicating the
reader is waiting for an alphanumeric entry, enter the required variable PIN
Code by scanning the corresponding bar codes in Appendix D, Keypad for
alphanumeric entry. Finish by scanning the Exit HID Variable PIN Code label.
Set Static Pin Code
DEFAULT DEFAULT
Set Variable Pin code
CANCEL
Make a mistake? Scan the CANCEL bar code to
abort and not save the entry string. You can then
start again at the beginning.
Exit HID Variable PIN Code