Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the
procedures described therein may be reproduced or transmitted in any form or by any means
without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates
("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-
exclusive, revocable license to reproduce and transmit this documentation for the purchaser's
own internal business purposes. Purchaser shall not remove or alter any proprietary notices,
including copyright notices, contained in this documentation and shall ensure that all notices
appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Datalogic representative. Electronic versions may either be downloadable from
the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you
visit our website and would like to make comments or suggestions about this or other Datalogic
publications, please let us know via the "Contact Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual that is complete
and accurate, however, Datalogic reserves the right to change any specification at any time
without prior notice. Datalogic is a registered trademark of Datalogic S.p.A. in many countries
and the Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc.
All other trademarks and trade names referred to herein are property of their respective owners.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log on to
and click on the links indicated for further information including:
PRODUCTS
Search through the links to arrive at your product page where you can download specific
Manuals
and
Software & Utilities
including:
-
Datalogic Aladdin™
, a multi-platform utility program that allows device
configuration using a PC. It provides RS-232 interface configuration as well as
configuration barcode printing.
SERVICE & SUPPORT
-
Technical Suppor
t - Product documentation and programming guides and Technical
Support Department in the world
-
Service Programs
- Warranty Extensions and Maintenance Agreements
-
Repair Services
- Flat Rate Repairs and Return Material Authorization (RMA) Repairs.
-
Downloads
– Manuals & Documentation, Data
Sheets, Product Catalogues, etc.
CONTACT US
Information Request Form and Sales & Service Network
PowerScan™ D8340
READERS
QUICK REFERENCE GUIDE
820035814 (Rev. E) July-2011
UPDATES AND LANGUAGE AVAILABILITY
UK/US
The latest drivers and documentation updates for this product are available
on the Internet.
Log on to: www.scanning.datalogic.com
I
Su Internet sono disponibili le versioni aggiornate di driver e documentazione
di questo prodotto. Questo manuale è disponibile anche nella versione
italiana.
Collegarsi a: www.scanning.datalogic.com
D
Im Internet finden Sie die aktuellsten Versionen der Treiber und
Dokumentation für dieses Produkt. Die deutschsprachige Version dieses
Handbuches ist auch verfügbar.
Adresse : www.scanning.datalogic.com
F
Les versions mises à jour de drivers et documentation de ce produit sont
disponibles sur Internet. Ce manuel est aussi disponible en version française.
Cliquez sur : www.scanning.datalogic.com
E
En Internet están disponibles las versiones actualizadas de los drivers y
documentación de este producto. También está disponible la versión en
español de este manual.
Dirección Internet : www.scanning.datalogic.com
CONNECTIONS
CONNECTING THE CABLE
A. Rubber gasket
B. Plastic boot
C. Cable spacer
D. Cover
E. Strain relief
1. Slip the cover over the cable.
2. Push the plastic boot into the
rubber gasket. Take care that
the tab on the plastic boot is
aligned with the notch in the
rubber gasket.
3. Push the plastic boot and gasket
into the handle. Ensure that the
“Front” marking on the plastic
boot is facing out, with the
arrow pointing towards the
front of the scanner.
4. Insert the cable into the socket
of the plastic boot.
5. Insert the cable spacer into the
cable wire and slide it towards
the handle.
6. Push the cover along the cable
towards the reader, and hook it
over the yellow “tooth”.
7. Insert the strain relief into the
cover and tighten the screw to
fix the whole assembly to the
reader handle.
Align
Notch
Tab
Arrow
COMPLIANCE
LASER SAFETY COMPLIANCE
The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN60825-1 at
the date of manufacture.
The laser scanner utilizes a low-power laser diode. Although staring directly at the laser beam
momentarily causes no known biological damage, avoid staring at the beam as one would with any very
strong light source, such as the sun. Avoid that the laser beam hits the eye of an observer, even through
reflective surfaces such as mirrors, etc.
The following information is shown on the laser scanner device class label:
LED CLASS
Class 1 LED product.
This product conforms to EN60825-1:2001.
The laser light is visible to the human eye and is emitted from
the output window (1).
Laser warning and classification label (2).
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specified herein may result in exposure to
hazardous visible laser light.
ITALIANO
LUCE LASER
NON FISSARE IL RAGGIO
APPARECCHIO LASER DI CLASSE 2
FRANÇAIS
RAYON LASER
EVITER DE REGARDER LE RAYON
APPAREIL LASER DE CLASSE 2
DEUTSCH
LASERSTRAHLUNG
NICHT IN DEN STRAHL BLICKEN
PRODUKT DER LASERKLASSE 2
ESPAÑOL
RAYO LÁSER
NO MIRAR FIJO EL RAYO
APARATO LÁSERDE CLASE 2
CE COMPLIANCE
Warning:
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of Datalogic could
void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference which may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer which supplies power
directly to the reader or else be supplied by a UL Listed/CSA Certified Power Unit marked “Class 2” or LPS
power source rated 4 - 30 V, minimum 420 mA, which supplies power directly to the reader via the power
connector of the cable.
WEEE COMPLIANCE
PATENTS
This product is covered by one or more of the following patents.
Design Pat. AU 310201; AU 310202; CN 693980; CN735959; HK 0602013.5M001; HK 0602013.5M002; JP
1305693; KR 30-0460940; US D570,843 S; USD588,596 S.
US Pat. 5,992,740; 6,305,606 B1; 6,517,003; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2; 5,367,151; 5,449,893;
5,545,889; 6,098,877; 6,220,514 B1; 6,412,698 B2; 6,607,132 B1; 6,817,529 B2; 6,834,805 B2; 7,948,214 B2.
European Pat. 789,315 B1; 895,175 B1; 1,128,314 B1; 1,128,315 B1; 1,396,811 B1; 1,413,971 B1; 1,816,585
B1; 1,942,442 B1.
Additional patents pending.
For information about the disposal of Waste Electrical and Electronic Equipment
(WEEE), please refer to the website at
dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el
POWERSCAN D8xx
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla
sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and
product safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité
des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit
und Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad
electromagnética y las Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
Datalogic Scanning, Inc.
07
959 Terry Street
Eugene, OR 97402
USA
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
89/336/EEC EMC Directive
e
92/31/EEC, 93/68/EEC
emendamenti successivi
and
further amendments
et
ses successifs amendements
und
späteren Abänderungen
y
succesivas enmiendas
EN 55022 (C
LASS
A ITE), August 1994:
A
MENDMENT
A1 (C
LASS
A ITE), October 2000:
L
IMITS
AND
METHODS
OF
MEASUREMENTS
OF
RADIO
DISTURBANCE
CHARACTERISTICS
OF
INFORMATION
TECHNOLOGY
EQUIPMENT
EN 61000-6-2, October 2001:
E
LECTROMAGNETIC
COMPATIBILITY
(EMC).
P
ART
6-2: G
ENERIC
S
TANDARDS
- I
MMUNITY
FOR
INDUSTRIAL
ENVIRONMENTS
.
March 1st, 2007
