TECHNICAL FEATURES
PRODUCT REFERENCE GUIDE
41
ù
TECHNICAL FEATURES
Using Input 1 (External
Trigger):
A trigger signal is con
-
nected to the camera,
but it is not acquiring
images or running
tasks.
• Check if you are referring to the 19-pin connector or to
the CBX spring clamp connectors.
• Is the sensor connected to Input 1 or Input 2?
• Is power supplied to the photo sensor?
• For NPN configuration, is power supplied to one of the
two I1 or I2 signals (A or B)?
• For PNP configuration, is one of the two I1 or I2 signals
grounded (A or B)?
• Are the photo sensor LEDS (if any) working correctly?
• Is the sensor/reflector system aligned (if present)?
• In VPM, check the Debounce settings (Settings – General
– Communication).
• Is the camera online?
TROUBLESHOOTING GUIDE
Problem
Suggestion
The image is not clear
• Verify the Focus procedure.
Image focused but tool
measurements are
inaccurate:
• Verify the image calibration procedure.
TROUBLESHOOTING GUIDE
Problem
Suggestion
Communication:
camera is not transmit
-
ting anything to the
host.
• Is the Ethernet cable wiring correct?
• Is the Ethernet cable wiring connected?
• Are the host IP address settings compatible with the
camera settings?
Communication:
data transferred to the
host are incorrect, cor
-
rupted or incomplete.
• Are the host IP address settings the same as the camera
settings?
• Is the Ethernet cable intermittent?
How do I obtain my
camera Serial
Number?
• The camera Serial Number consists of the letter “C” fol
-
lowed by a series of numbers. It is printed in the rear of
the camera.
TROUBLESHOOTING GUIDE
ELECTRICAL FEATURES
Power
Supply Voltage
10 to 30 Vdc
Consumption
0.7 to 0.2 A
Communication Interfaces
Ethernet
10/100 Mbit/s
(supports application protocols: TCP/IP, EtherNet/IP, Profinet IO, Modbus TCP)
RS232
2400 to 115200 bit/s
