USE AND FUNCTIONING
11
3
3.2.1 Barcode
Scanning
To scan barcodes, point the Minec 4x terminal laser beam onto the code from a
distance within the reading range while pressing the [SCAN] key or the application
defined key. See the reading diagram in chapter 5.2 for the reading range according
to the code density.
The scan line emitted by the laser must completely intercept the barcode as shown in
the figure below. If enabled, the Good Read LED and the emission of an acoustic
signal will indicate that the scan has taken place correctly.
3.2.2
RFID Data Collection
Minec 4x RFID models (Radio Frequency Identification) can read and write tags.
To read a tag, place the Minec 4x terminal so that the RFID emission window is in
front of and almost in contact with the tag, then press the [SCAN] key or the
application defined key.
To write a tag, the RFID_Sample program is available on CD-ROM and must be
copied onto the terminal.
Содержание MINEC 4x
Страница 1: ...MINEC 4x User s Manual ...
Страница 2: ......
Страница 3: ...Minec 4x USER S MANUAL ...
Страница 18: ...xvi Key A Minec 4x data label B Battery cover C Wrist strap B A C ...