PROGRAMMING STRINGS
9
3
3.2.5 Set Startup Configuration (Job)
The Matrix startup configuration setting command must have the following format:
STARTUP_CFG<space>configuration_name <LF>
If the command is correct, the device confirms with the following message:
ACK <LF>
If the command is wrong (i.e. a typing error) or due to a transmission error, the device replies
with the following message:
NACK <LF>
After transmitting the reply message, the device then waits for another programming string or
the exit from host mode programming command.
NOTE:
The configuration names must match those saved on the device.
They can contain spaces and
are
case sensitive.
This command does not change the current configuration. It also does not
require the
SAVE
command to be issued.
3.2.6 Change Current Configuration (Job)
The Matrix change configuration command must have the following format:
CHANGE_CFG<space>configuration_name <LF>
If the sequence is correct, the device confirms with the following message:
ACK <LF>
If programming contents are wrong (i.e. a typing error) or due to a transmission error, the
device replies with the following message:
NACK <LF>
After transmitting the reply message, the device then waits for another programming string or
the exit from host mode programming command.
NOTE:
The configuration names must match those saved on the device.
They can contain spaces and
are
case sensitive.
This command does not change the Startup Configuration.
