manualshive.com logo in svg

Datalogic Matrix 400, Руководство пользователя, Страница: 34 / 86

Поделиться
Скачать
Datalogic Matrix 400 Скачать руководство пользователя страница 34

MATRIX 400™ CODE QUALITY VERIFIER SOLUTION 

 

1 

STEP 10 – SAVE VERIFICATION REPORT 

 
The Symbol Verification window allows to generate and save a report containing your 
verification results. 
 

 

1

 
1.  Press the “Save Report” button. The reader generates and save the verification report as 

a HTML, RTF, TXT or CSV file according to the settings configured in the Symbol 
Verification Options window (see 

Step 6

). 

 

 

Figure 10 - Symbol Verification Options window 

 
2.  If the “Store Using Defined Path” option is disabled, select where the verification report 

must be stored and the file name in the Save As window. Once you have pressed the 
“Save” button the reader starts to transfer report to the selected location. If the “Automatic 
Image Storing” option is enabled, the acquired image will be automatically transferred to 
the same location. 

3. If the “Automatic Report Opening” option is enabled, the verification report is 

automatically opened in the choosen format. 

26 

 

 

Содержание Matrix 400























































































Отзывы:

Нет отзывов