Datalogic Magellan 9300i, Руководство по продукции

Страница: 162 / 520

Enter/Exit Programming Mode General Scanner and Scale Features
150 Magellan™ 9300i / 9400i Scanners
Good Read Beep Length
Specifies the duration of a good read beep.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code,
Set Good Read Beep Length on page 150 . You’ll need to
cover any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C that represent
the desired good read beep length setting. The selectable range is 1-255,
which is the timeout in 10-millisecond increments. Times have a tolerance
of +/-25%. Pad all single and double digit numbers with leading zeroes to
yield a three-digit entry (001-255).
Examples:
001 = 10ms
005 = 50ms
040 = 400ms
250 = 2,500ms (2.5 seconds)
4. The scanner will automatically exit Programming Mode when the appro-
priate amount of digits have been scanned.
Set Good Read Beep Length
Default setting for this feature is:
008 - 80ms
0016(CR)
DEFAULT