manualshive.com logo in svg

Datalogic MAGELLAN 8200, Руководство по продукции, Страница: 268 / 440

Поделиться
Скачать
Datalogic MAGELLAN 8200 Скачать руководство пользователя страница 268

6-160

Magellan

®

 8100/8100

Ω

 and 8200

/

8200

Ω

 

Scanner

GTIN Enable

Enables/Disables the ability to convert UPCE, UPCA, EAN8, and 
EAN13 labels into the GTIN 14-character format.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You’ll need to cover 

any unused bar codes on this and the facing page to ensure that the 
scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH 

bar code.

GTIN = DISABLE

GTIN = ENABLE

NOTE

If add-on information is present on the base label prior to the conversion
taking place, the add-on information will be appended to the converted
GTIN bar code.

Содержание MAGELLAN 8200

























































































































































































































































































































































































































































Отзывы:

Нет отзывов