manualshive.com logo in svg

Datalogic Magellan 2200VS, Руководство по продукции

Поделиться
Скачать
Datalogic Magellan 2200VS Скачать руководство пользователя страница 25

Product Reference Guide

2-1

Chapter 2

Site Preparation and Installation

This chapter outlines the procedures for unpacking the scanner, verifying 
function, preparing the countertop or wall, routing cables, and installing 
the scanner.

Unpacking

To unpack the unit:

•

Inspect the package for signs of damage that may have occurred dur-
ing shipping. If damage is found, report it to your carrier immedi-
ately.

•

Lift any accessories from the box, including the AC/DC Power Sup-
ply, and the Quick Reference Guide.

•

Familiarize yourself with the Quick Reference Guide. Leave the 
guide at the checkstand when the installation is complete.

•

Remove the protective packing and carefully lift the scanner from 
the carton. Be sure to save the box and all packing material. In the 
event of failure, the unit must be returned to the factory in its origi-
nal packaging

.

Proceed to the 

Operational Verification

 instructions below.

Содержание Magellan 2200VS





































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды