© 2009 - 2013 Datalogic ADC, Inc
820061314 (Rev. B)
November 2013
Existing Installation
For your convenience, the Fixed Mounting Plate has been designed to
mount to the same hole patterns that have already been drilled for a
scanner being replaced. Just push the new screws up through the existing
holes to secure the mounting plate in place of the old unit. If the screw
pattern doesn’t match, attach using the New Installation instructions.
Latching/Unlatching the Scanner
1.
To latch, engage the front latches as shown in the “Latching” illustra-
tion, then rotate the rear of the scanner down onto the stand to
secure the scanner in the rear latch.
2.
Unlatching: Grasp the scanner as shown and rotate the rear up and
away from the stand to disengage the rear latch, then the opposite
end away from the front latches.
Rear
Latch
Scanner
Rear
Latch
g
n
i
h
c
t
a
l
n
U
g
n
i
h
c
t
a
L
Front
Latches
