Datalogic Jade X7, Краткое руководство пользователя

Страница: 7 / 16

Operation
Quick Reference Guide 3
Operation
CAUTION
Power-on
If scanner power is not already on, press the power switch located on the System Control Box to the ON
position. The illustration that follows show the ON/OFF Switch for both models. The scanner arch indi-
cator lights will then show the Startup indication (indicated by arch indicator lights blinking red, green,
blue as described on
page 7
). Scanner startup can take several minutes.
If the scanner is already powered on, but in Sleep Mode (indicated by arch indicator lights blinking blue),
it can be returned to Normal Operation by a host command from the POS.
Figure 3. ON / OFF Switch and Grounding Screw Location
E D C B A
POS
12V
POS
E D C B A
POS POS 12V,10.5A
CLASS 1
WIRING
-OR-
Grounding Screw
ON / OFF
Switch
(not present on all models)
Prior to powering on the Jade unit, the installer should ensure that the Jade unit
has been grounded to earth ground. Some models have a Grounding Screw (shown
in
Figure 3
below). Reference the Jade X7 PRG for complete grounding and installa-
tion instructions.