Datalogic Jade X7, Краткое руководство пользователя

Страница: 10 / 16

Maintenance
6 Jade™ X7 Portal Scanner
Spillage
Inevitably, packages placed on the conveyor belt will break open or bottles will leak. In anticipation of
this problem, the scanner has been designed to channel the flow of spillage through less-vulnerable
areas.
Figure 5
shows how a leakage is routed by the Debris Tray/Window toward the outside of the
unit, then through a drain hole into a container placed to collect it. This container, of course, must be
periodically checked and emptied.
Figure 5. Provisions for Spillage
END SIDE
Debris Tray/
Window
Liquid and Debris Spillage
Drain Hole
Spillage
Container
Debris Tray/Window
A Debris Tray/Window is located just beneath the transition plate. The tray acts to collect and route
any spillage from the conveyor belt area and protect the bottom scanner from contamination. For best
scan performance it is important to regularly check and clean the Debris Tray/Window to ensure the
Bottom Scanner optics are never obscured.
Figure 6. Removing/Reinstalling the Debris Tray/Window
Debris Tray/Window