Datalogic Gryphon I GM440 Series, Руководство по продукции

Страница: 152 / 350

Enter/Exit Programming Mode1D Code Selection
142 Gryphon™ I GD44XX/GBT4400/GM440X
Code 39 Set Length 1
This feature specifies one of the bar code lengths for Code 39 Length Con-
trol . Length 1 is the minimum label length if in Variable Length Mode, or the
first fixed length if in Fixed Length Mode. Length includes the bar code’s
data characters only. The length can be set from 0 to 50 characters.
Table 1 provides examples for setting Length 1. See page 283 for detailed
instructions on setting this feature.
Table 1. Code 39 Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 39 LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC3L1
Select Code 39 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
02 = Length 1 is 2 Characters