Datalogic Gryphon I GD44XX, Краткое руководство пользователя

Страница: 12 / 52

Setting Up the Reader
2 PowerScan™ Retail PBT9500-RT
Setting Up the Reader
Follow the steps below to connect and get your reader up
and communicating with its host.
1. Connect the Cable to the reader and the Host.
2. Configure the Interface (see page 4).
3. Configure the reader starting on page 17
(optional, depends on settings needed)
Connect/Disconnect Cable to Reader
Figure 1. Connecting to the Reader
Host Connection — The Gryphon reader plugs directly into
the host device as shown in Figure 2 . The power can also
be supplied through an external power supply via the
Interface Cable supplied with a power jack.
Figure 2. Connecting to the Host
US
B