Datalogic Gryphon I GD4400, Руководство по продукции

Страница: 240 / 350

Enter/Exit Programming Mode QR Code
238 Gryphon™ I GD44XX/GBT4400/GM440X
QR Code
Set Length 2
This feature specifies one of the bar code lengths for QR Code Length Con-
trol . Length 2 is the maximum label length if in Variable Length Mode, or the
second fixed length if in Fixed Length Mode. Characters can be set from
0001 to 7,089 characters in increments of 0001 (pad with zeroes).
See
page 283 for detailed instructions on setting this feature.
$CQRL2
Select QR Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad
representing
your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
Length 2 is 7,089 Characters