Datalogic Gryphon I GD4132, Руководство по продукции

Страница: 281 / 354

ENTER/EXIT PROGRAMMING MODE
Product Reference Guide 279
BT Pin Code
After enabling Security Mode (see "" BT Security Mode" on page 278 ), specify
whether you want to set a 4-digit or a 16-digit PIN Code. See page 313 for
detailed information and examples for setting this feature.
Select PIN Code Length
DEFAULT
Select 4-character BT PIN Code
Select 16-character BT PIN Code
Set PIN Code
Determine the desired characters for the PIN code, then convert to hexadecimal
using the ASCII Chart on the inside back cover of this manual. See page 313 for
detailed information and examples for setting this feature.
Set 4-character BT Pin Code
DEFAULT
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the desired
bar code , followed by the digits from the Alphanu-
meric characters in Appendix D. Keypad representing
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
Set 16-character BT PIN Code
CANCEL
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start
again at the beginning.