manualshive.com logo in svg

Datalogic Gryphon I GD4100, Справочное руководство, Страница: 164 / 428

Поделиться
Скачать
Datalogic Gryphon I GD4100 Скачать руководство пользователя страница 164

RF Features

162

Gryphon™ I GD4100/GM4100

Configuration Update

Automatic Configuration Update

When this feature is enabled, a reader and its linked Base Station can automatically ensure they 
stay in sync with regard to application hardware and/or configuration. This is accomplished by 
the linked reader and Base Station comparing application version number and configuration file 
check sum. If either is different, the Base Station will automatically update the reader with its 
application/configuration.

If the units are linked, any changes made to the Base Station configuration through the scan 
utility software will automatically be sent to the reader at the completion of the programming 
session.

In the same way, any changes made to the linked reader’s configuration will also be transmitted 
to the Base Stati

on when the reader exits Programming Mode.

If Auto Configuration update is enabled, it can also be done when the reader is installed on its 
base station. 

ENTER/EXIT PROGRAMMING MODE

Automatic Configuration Update = Disable

Automatic Configuration Update = Enable

DEFAULT

Содержание Gryphon I GD4100













































































































































































































































































































































































































































Отзывы:

Нет отзывов