manualshive.com logo in svg

Datalogic Gryphon GD4100, Справочное руководство, Страница: 389 / 428

Поделиться
Скачать
Datalogic Gryphon GD4100 Скачать руководство пользователя страница 389

Product Reference Guide

387

Appendix B

LED and Beeper Indications

The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on 
the reader. An optional “Green Spot” also performs useful functions. The tables below list these 
indications. One exception to the behaviors listed in the tables is that the reader’s functions are 
programmable, and may or may not be turned on. For example, certain indications such as the 
power-up beep can be disabled using programming barcode labels.

Table 49. 

INDICATION

DESCRIPTION

LED

BEEPER

Power-up Beep

The reader is in the process of pow-
ering-up.

Reader beeps four times at highest 
frequency and volume upon 
power-up.

Good Read Beep

A label has been successfully 
scanned by the reader.

LED behavior for this indica-
tion is configurable via the 
feature “

Good Read: When 

to Indicate

”

The reader will beep once at cur-
rent frequency, volume, mono/bi-
tonal setting and duration upon a 
successful label scan.

ROM Failure

There is an error in the reader's 
software/programming

Flashes

Reader sounds one error beep at 
highest volume.

Limited Scanning 
Label Read

Indicates that a host connection is 
not established when the IBM or 
USB interface is enabled.

N/A

Reader 'chirps' six times at the 
highest frequency and current vol-
ume.

Reader Active 
Mode

The reader is active and ready to 
scan.

The LED is lit steadily

a

a. Except when in sleep mode or when a 

Good Read LED Duration

 other than 00 is selected

N/A

Reader

Disabled

The reader has been disabled by 
the host.

The LED blinks continuously

N/A

Green Spot is on 
continuously

While in Stand Mode or Trigger 
Stand Mode the green spot shall 
be on while in stand watch state.

N/A

N/A

Green Spot

a

 

flashes momen-
tarily

Upon successful read of a label, the 
software shall turn the green spot 
on for the time specified by the 
configured value.

N/A

N/A

LED and Beeper Indications

Содержание Gryphon GD4100













































































































































































































































































































































































































































Отзывы:

Нет отзывов