FORMULA™ QUICK REFERENCE GUIDE
•
Press
<F1>
to begin using
PALPRO
.
5. The application requests an update to the date and time. You can change
them here if necessary. Or, press
<ENT>
twice to skip either the date or the
time.
6. Enter a password (refer to par. 2.2.3).
7. Press any function key to continue on to the
PALPRO Options
menu.
8. Press
the
<F2>
key to display the list of available applications. Select the
application to use. (refer to par. Switching to Another PALPRO Application).
The Formula™ is now ready to begin collecting data. For information about
sending collected data from the Formula™ to a PC, refer to par. 3.5.
2.2
SETTING UP THE FORMULA™
You can collect data records on the Formula™, and send the records later to a host
PC. The number of data records that can be collected before being uploaded are
2500 for each application.
2.2.1 Getting
Started
Unless it has been customized, the Formula™ is programmed from the factory for
basic data collection using
PALPRO
.
NOTE
This chapter describes how to use the Formula™ with its original
PSC programming (i.e. PALPRO). If the Formula™ has been
customized, it may operate differently. Check with a systems
administrator for revised operating instructions.
If the Formula™ does not turn on when the <PWR> key is pressed,
you many need to recharge the main battery.
3
