manualshive.com logo in svg

Datalogic EtherNet/IP DS6 00 Series, Инструкция по установке и эксплуатации, Страница: 49 / 54

Поделиться
Скачать
Datalogic EtherNet/IP DS6 00 Series Скачать руководство пользователя страница 49

Installation and User Guide 

 

DS6x00 EtherNet/IP Scanner 

Rev  1.02 

 

General 

Status Code 

(in hex) 

Status Name 

Description of Status 

16 

Object does not exist 

The object specified does not exist in the device. 

17 Service 

fragmentation 

sequence not in progress 

The fragmentation sequence for this service is not currently active for 
this data. 

18 

No stored attribute data 

The attribute data of this object was not saved prior to the requested 
service. 

19 

Store operation failure 

The attribute data of this object was not saved due to a failure during 
the attempt. 

1A 

Routing failure, request 

packet too large 

The service request packet was too large for transmission on a 
network in the path to the destination. The routing device was forced 
to abort the service. 

1B 

Routing failure, response 

packet too large 

The service response packet was too large for transmission on a 
network in the path from the destination. The routing device was 
forced to abort the service. 

1C 

Missing attribute list entry 

data 

The service did not supply an attribute in a list of attributes that was 
needed by the service to perform the requested behavior. 

1D 

Invalid attribute value list 

The service is returning the list of attributes supplied with status 
information for those attributes that were invalid. 

1E 

Embedded service error 

An embedded service resulted in an error. 

1F 

Vendor specific error 

A vendor specific error has been encountered. The Additional Code 
Field of the Error Response defines the particular error encountered. 
Use of this General Error Code should only be performed when none 
of the Error Codes presented in this table or within an Object Class 
definition accurately reflect the error. 

20 

Invalid parameter 

A parameter associated with the request was invalid. This code is 
used when a parameter does not meet the requirements of this 
specification and/or the requirements defined in an Application 
Object Specification. 

21 

Write-once value or 

medium already written 

An attempt was made to write to a write-once medium (e.g. WORM 
drive, PROM) that has already been written, or to modify a value that 
cannot be changed once established. 

22 

Invalid Reply Received 

An invalid reply is received (e.g. reply service code does not match 
the request service code, or reply message is shorter than the 
minimum expected reply size). This status code can serve for other 
causes of invalid replies. 

23 – 24 

 

Reserved by CIP for future extensions 

25 

Key Failure in path 

The Key Segment that was included as the first segment in the path 
does not match the destination module. The object specific status 
shall indicate which part of the key check failed. 

26 

Path Size Invalid 

The size of the path which was sent with the Service Request is either 
not large enough to allow the Request to be routed to an object or too 
much routing data was included. 

27 

Unexpected attribute in 

list 

An attempt was made to set an attribute that is not able to be set at 
this time. 

28 

Invalid Member ID 

The Member ID specified in the request does not exist in the specified 
Class/Instance/Attribute 

29 

Member not settable 

A request to modify a non-modifiable member was received 

2A 

Group 2 only server 

general failure 

This error code may only be reported by DeviceNet group 2 only 
servers with 4K or less code space and only in place of Service not 
supported, Attribute not supported and Attribute not settable. 

2B – CF 

 

Reserved by CIP for future extensions 

D0 – FF 

Reserved for Object Class  This range of error codes is to be used to indicate Object Class 

© 2004 Datalogic S.p.A. – All Right Reserved 

Page 49 of 54 

 

 

Содержание EtherNet/IP DS6 00 Series























































Отзывы:

Нет отзывов