Datalogic DS6300 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 39

Datalogic DS6300 Скачать руководство пользователя страница 29

COMMON FEATURES

27

Typical Installations:

Standard Installation
The DS6300 scanner is mounted on the ST-237 106° mounting bracket which guarantees a built-in Skew angle
(

S

in the figure below) of 16° with respect to the frame plane (typically the Skew angle should be between

10° - 20°). This avoids the direct reflection of the laser light emitted by the scanner. Furthermore, the bracket
guides allow adjusting the Tilt angle (

T

in the figure below, which is typically 0°) for the best scanner orientation:

“45° Skew” Installation
The DS6300 scanner is mounted on the ST-210 90° mounting bracket. By adjusting the mounting bracket guides,
reach 45° for the Skew angle (

S

in the figure below) to avoid the direct reflection of the laser light emitted by the

scanner:

ATTENTION

If using the “45° Skew” installation, the scanner reading performance is not guaranteed to
match that measured for the standard installation with Skew angle between 10° - 20° (see
reading diagram section).

NOTE

The ST-210 mounting bracket is an accessory of the DS6300 standard model available in the
US-60 kit (order no. 890001020).

WARNING

When installing several scanners, take care to position them correctly so that no laser beam
enters the reading window perpendicularly and at the same level of the output beam of the
other scanners. This condition could occur more frequently for side mounted applications. If
these precautions are not followed, it may occur that the laser of the blinded scanner starts
blinking due to an internal circuit which temporarily turns the laser off when detecting a power
anomaly. To resolve this problem, it is sufficient to slightly change the inclination and position
of one of the two scanners involved.

T

Conveyor Direction

S

45°

S

«
...
27
28
29
30
31
...
»

Содержание DS6300








































Отзывы:

Нет отзывов