DS2400A QUICK GUIDE
3
Accessories:
Name Description
Part
Number
GFC-2100
90° Reading Device
93A201000
GFC-2000
105° Reading Device
93A201080
OM2000 Oscillating
Mirror
93A251031
INT-30
(for C-Box 100)
20 mA Current Loop Interface Board
93A151022
C-BOX 100/200
Connection Box 93ACC1510,
93ACC1520
C-BOX 300/310
Connection Box Profibus 93A301000,
93A301030
C-BOX 400/410
Connection Box DeviceNet 93A301010,
93A301040
MEP-542/543 Photocell
Kit
NPN/PNP 93ACC1727,
93ACC1728
Electrical Connections:
DS2400A is equipped with a cable terminated by a 25-pin female D-sub connector for connection to the power
supply, communication interface and input/output signals. You can bring system cables directly to the 25-pin
connector or you can connect the scanner directly to one of the various C-Box models and bring system wiring to
it (see the relative C-Box Installation Manual).
CAUTION
Do not connect GND and SGND to different (external) ground references. GND and SGND
are internally connected through filtering circuitry which can be permanently damaged if
subjected to voltage drops over 0.8 Vdc.
The details of the connector pins are indicated in the following table:
25-pin D-sub female connector pinout
Pin Name Function
13
VS
Power supply input v
25
GND
Power supply input voltage -
1 CHASSIS
Chassis
Ground
9
VS
External Trigger supply v
18
EXT TRIG+ External T
19
EXT TRIG-
External Trigger -
8
OUT1 +
Output 1 +
11
OUT2 +
Output 2 +
12, 22
OUT REF
Output reference
20 RXAUX Auxiliary
RS232
21 TXAUX Auxiliary
RS232
23
CTSAUX
Auxiliary handshake RS232
24
RTSAUX
Auxiliary handshake RS232
6, 10, 14,
15, 16, 17
NC Not
Connected
25-pin female connector
Pin RS232
RS485
Full-Duplex
RS485
Half-Duplex
2 TX232
TX485+
3 RX232
RX485+
4 RTS232
TX485-
RTX485-
5 CTS232
RX485-
7
SGND SGND SGND