External Interfaces Description
6
DLR-PR001-XX
External Interfaces Description
Connectors
The DLR-PR001-XX reader is equipped with the followings
ports:
Figure 3. DLR-PR001-XX Connectors View
Power Supply Connector
The power supply connector shall be used to provide the
reader with the DC supply voltage in the range 9V to 36V.
The part number of the connector is KPJX-3S-S by Kycon,
the pinout of the connector is shown in the following
table:
The external shield can be connected to Ground.
Figure 4. Power supply connector
Pin #
Signal
Description
1
GND
Ground
2
V+
DC input Voltage
3
GND
Ground
