Datalogic DataVS1, Инструкция по эксплуатации

Страница: 27 / 88

Instruction Manual DataVS1 Series
23
The standard save procedure is described in detail in paragraphs 5.7 and 6.3. It is also possible to
perform a quick save of the settings as follows.
Press the
TEACH
button when in Monitor mode. A window will appear with a summary of the
modifications made to the current inspection and the memory slot currently enabled.
To save the setting, simply press the
TEACH
button again. Press
ESC
if you wish to return to Monitor
mode.
5.7. Step 4 - Output definitions and saving the inspection settings to the sensor
When you enter System Mode, the VSC will display the following menu
Before saving the inspection to the sensor, it is necessary to set the digital outputs.
The sensor has three configurable digital outputs, for each of these you can set the operating mode,
duration and delay (duration and delay are common settings for all three outputs).
To define the behaviour of the outputs according to the result of the set control, use the
ARROW
buttons to move to the
OUTPUT
icon and press the
SET
button.