INSTALLATION
The C-3000 can be mounted for portable or fixed desktop usage, or it can be fixed
to a wall. The horizontal base allows portable and fixed desktop usage, while the
inclined base provides desktop and wall mounting guaranteeing a comfortable
handling of the Dragon™ M131 reader.
The cradle package contains the following items:
C-3000 1
horizontal
base
C-3000 Quick Reference Guide
1 inclined base
2 adhesive strips
2 wall-mounting lock hinges
4 rubber feet
DESKTOP MOUNTING
Figure 3 - Horizontal Base Front and Bottom View
Figure 4 - Inclined Base Front and Bottom View
Portable Desktop Use
1.
Correctly position the C-3000 onto the base by sliding it along the mounting
tabs until aligned.
1
2
1
2
2.
Carefully clean the rubber foot seats of the base to remove any impurities
that could reduce adhesion.
3.
Remove the protective plastic from the rubber feet and stick them onto the
bottom surface of the base.
Fixed Desktop Use
For fixed desktop installation, use the adhesive strips or fixing screws (not
provided) according to your needs.
For mounting with adhesive strips:
1.
Position the cradle onto the base by sliding it along the mounting tabs until
aligned.
2.
Carefully clean the adhesive strip seats of the base to remove any impurities
that could reduce adhesion.
3.
Remove the protective plastic from one side of the adhesive strips and stick
them onto the base surface.
4. Position the cables to be connected to the C-3000 cradle along the
dedicated channels.
5.
Remove the plastic from the other side of the strips and affix the base to the
table.
For mounting with screws:
1. Position the cables to be connected to the C-3000 cradle along the
dedicated channels.
2.
Position the base on the table and affix it by means of the screws (not
provided).
3.
Position the cradle on the base by sliding it along the mounting tabs until
aligned.
WALL MOUNTING
1.
Remove the yellow caps and insert the two wall mounting lock hinges
provided with your cradle.
2. Position the cables to be connected to the C-3000 cradle along the
dedicated channels.
If using the
adhesive strips
:
3. Carefully clean the adhesive
strip seats of the base to
remove any impurities that
could reduce adhesion.
4.
Remove the protective plastic
from one side of the adhesive
strips and stick them onto the
base surface.
5. Remove the plastic from the
other side of the strips and affix
the base to the wall as
indicated in the figure below.
If using the
mounting screws
:
3. Using the mounting holes on
the base as a pattern, mark the
wall where you desire to mount
the C-3000.
4.
Drill the appropriate size holes
and insert the threaded dowels
(not provided) into the holes.
5.
Position the base on the wall as
indicated in the figure below
and affix it by means of the
screws (not provided).
Inclined Base Wall-mounting
6.
Attach the cradle on the base by sliding it along the mounting tabs until
aligned.
Mounting Tabs (4)
Mounting Holes (2)
Rubber Foot Seat (4)
Adhesive Strip Seat (2)
Cable Channels
Mounting Tabs (4)
Mounting Holes (4)
Adhesive Strip Seat (2)
Cable Channels
Rubber Foot Seat (4)
