Sentry K300 Managed User Guide
3. Click the
Checkbox
for auto-locking the device and set the time-out to one of the following
time intervals: 5, 15, 30, 60, 120, or 180 minutes.
To run CHKDSK (Windows only):
1. Unlock the device.
2. Press the WINDOWS LOGO KEY + R to open the Run prompt:
3. Type CMD and press ENTER.
4. From the command prompt, type CHKDSK, the PRIVATE USB drive letter, then “/F /R”. For
example, if the PRIVATE USB drive letter is G, you would type: CHKDSK G: /F /R
5. Use data recovery software if necessary in order to recover your files.
Features
Standalone Logins
Requesting Standalone Logins
Standalone mode allows the Secure Volume of the Sentry K300 to be accessed by any computer
that has support for removable storage. Standalone mode is controlled by a policy that is set by
your SafeConsole Administrator. If this mode is not available, please contact them to enable this
feature. SafeConsole administrators will define the maximum allowed times the Sentry K300 can be
unlocked in Standalone mode before the device needs to be returned to a Windows computer to
check in.
To request Standalone logins, perform the following steps on a workstation that has a valid connec-
tion to the SafeConsole server:
1. Connect the Sentry K300 in SafeConsole mode. See the
for more informa-
tion.
2. On the K300 Control Panel, click the
Gear Icon
to open up settings.
3. Select the Standalone tab.
4. Select the reason for the request or enter a custom reason. This information will be sent to the
SafeConsole Administrator.
5. Click the
Request
button. You will receive the maximum number allowed.
Note:
The Request automatically checkbox can optionally be enabled by your SafeConsole
Administrator. If available, the control panel will automatically try to request more Standalone logins
after unlocking on a Windows workstation when checked.
© 2019 DataLocker Inc. All rights reserved.
11