Sentry K300 SafeConsole Deployment guide
Once the device is assigned to the new user, the K300 can be given to the End User along with the
Password Reset Code, which will force the End User to create their own password. The Password
Reset Code is found by following the steps below.
Password Reset
Because authentication happens before the Unlocker client is launched, password reset works
differently on the Sentry K300 compared to other SafeConsole Ready Devices. Along with the
normal password to unlock the K300, a secure password will be created after registering to Safe-
Console. When this password is entered to the K300 it will set the original password back to the
default ‘1234567’ and force the user to create a new password. Users should be made aware that
password reset is available if they forget their password, as to not cause data loss by entering an
incorrect password 20 times. The following steps should be taken when a password reset is needed:
1. A SafeConsole Administrator should log into the SafeConsole server.
2. Locate the K300 by referencing the serial number, which can be found by going to
Manage
,
then
Drive
.
3. Click the device’s serial number to open the Device Details screen.
4. Click
Reset password
.
© 2018 DataLocker Inc. All rights reserved.
7
