manualshive.com logo in svg

Datafox TimeboyIV, Руководство пользователя

Поделиться
Скачать
Datafox TimeboyIV Скачать руководство пользователя страница 30

 

5.7.  Bar Code Laser Scanner 

The bar code reader has an own intelligence and is delivered with default settings. The default set-
tings allow the reading of the bar code types UPC-A, EAN 8, EAN 13, Code 128, Code 39 and Inter-
leaved 2/5. The scanner has various additional functions. Please observe the manual “SE 955 - 
Scan Engine Integration Guide.pdf“ on the DVD or in the download area of our website. Settings are 
made by scanning the corresponding bar code in the manual. 

 

The most important configuration bar codes, which are necessary for standard use of the Timeboy, 
are summarized subsequently. The scanner beam turns off when the configuration bar code was 
read. The display shows no information as configuration bar codes are processed directly by the 
scanner. The input field must be configured in the setup correspondingly so that scanning is possi-
ble. Alternatively, you can make the settings needed via the system menu Scanner Test.

 

If the scanner is reading but nothing is displayed at the Timeboy, the settings of the scanner have 
possibly been altered. In this case, please restore the basic settings. 

 

 

 

You can find this sheet with bar codes on the DVD under < Datafox DVD\Timeboy II und III\Datafox_TimeboyIII\Handbuch, Doku>. 
 

Please observe the notes in the chapter "

For Your Safety

" when using the laser scanner.

 

 

5.8.  Transponder Reader (RFID) 

The transponder reader is integrated in the device. The type plate and the label at the back side of 
the device show you whether the option is available. The transponder reader is enabled via the set-
tings in Datafox Studio. 
When the transponder reader is active, a beeper signal is sent. Hold the transponder close to the 
transponder label of the Timeboy. Whether the transponder reader is to be activated automatically 
or manually via the key Barcode/RFID, can be set in the setup. 
 

Transponder Reader TS-21 125kHz: 

 

Unique, Hitag1, Hitag2, HitagS, Titan/Hewi/EM4450 

 

Transponder Reader ISO 13,56 MHz R/W

: 

  ISO14443 u. ISO15693 (Mifare-DESFire, MF Plus, ICode…) 

 

Transponder Reader for Legic Advant 

 Legic 

Advant 

 

Manual TimeboyIV 

page 25 

    date: 11.07.2013  Version 04.02.04 

Содержание TimeboyIV






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды