DataExpert MLX8440 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 34

DataExpert MLX8440 Скачать руководство пользователя страница 19

19

Chapter 3: BIOS Setup

Virus Warning

Choose Enabled or Disabled. Enable this option and a SYSTEM WARNING

MESSAGE appears when the system detects a virus.

CPU Internal Cache

Choose Enabled or Disabled. This option lets you enable the CPU's internal

cache memory.

External Cache

Choose Enabled or Disabled. This option lets you enable the external cache

memory. For better performance, make sure you always choose "Enabled.

Quick Power On Self Test

Choose Enabled or Disabled. Enabled provides a fast POST and boot-up

speed.

Boot Sequence

The default setting first to boot from drive C:. You can reverse this sequence

with " A, C, SCSI", will then drive A: boot directly.

Swap Floppy Driver

Choose Enabled or Disabled. When Enabled Floppy drives A & B are swapped

under DOS.

Boot Up Floppy Seek

Choose "Enabled" or "Disabled". "Disabled" provides a fast boot and reduces

the possibility of damage to the heads.

Boot Up Num Lock Status

Choose On or Off. On puts numeric keypad in Num Lock mode at boot-up.

Off puts this keypad in arrow key mode at boot-up.

Typematic Rate Setting

Choose Enabled or Disabled. Enable this option to adjust the keystroke repeat

rate.

Typematic Rate(Chars/Sec)

Choose the rate a character keeps repeating.

«
...
17
18
19
20
21
...
»

Содержание MLX8440



































Отзывы:

Нет отзывов