© 2015 Datacom Systems Inc
10
VS-10XX-F, VS-11XX-F, VS-12XX-F FASTstart Guide
3 Network IP Address Configuration
All VERSAstream Network Packet Brokers can be accessed and configured though the
management port on the rear panel of the unit. Once set up, this port can be used to access the
device through Telnet, SSH, or HTTPS.
3.1 Default Settings
All Network Packet Broker series units are shipped with a factory default configuration as follows:
IMPORTANT:
If you expect to remotely connect to the VERSAstream series, you must
change the IP Address, Subnet Mask and Gateway to match your Local Area Network.
In order to initially change the IP settings on the management port, you must connect to the device
over the serial port.
SSH and Telnet
Port
:
22 and 23
Serial Terminal Settings
Bits per second:
115200
Data bits:
8
Parity:
None
Stop:
1
Flow Control:
None
Management Port Settings
IP Address
:
192.168.1.1
Subnet Mask
:
255.255.0.0
Default Gateway
:
192.168.0.1
User Settings
Username:
Administrator
Password:
admin