2
Preparing for Installation
Unpacking the SR200 or SR300 Printer
Remove the SR200 or SR300 card printer from the shipping carton. Remove all packing tape
from inside and around the printer. Remove the protective cushion that protects the printhead,
and the cushion for the magnetic stripe head, if installed.
Unpacking other options
The printer has options installed in the factory and marked on the options label on the back of
the printer. Each option installed has a marked or filled square. The illustration shows a printer
with Double-sided printing, Bend Remedy, and Magnetic Encoder options.
The SR200/SR300 printer can have one of two factory-installed smart card options.
•
If a Contact IC Enc/ R/W is installed, download and install the smart card driver
before setting up the printer. See
“Installing a Smart Card Driver” on page 5
to
download and install the driver.
•
If a Contact IC Encoder Case is installed, ask your dealer or integrator for the files
to install.
The smart card option is setup for use with a USB data cable.
The SR200/SR300 Card Printer weighs approximately 27.6 pounds (12.5kg)
with options installed. Use care when removing the printer from the shipping
container.
Note:
Save the shipping carton and packaging materials. They are required if
you need to store, move or return the printer for service. Replacements might
not be available.
