![background image](http://html1.mh-extra.com/html/datacard/sp55-plus/sp55-plus_printer-manual_3650487028.webp)
Page 25
Site requirements
Operating environment
•
Relative humidity: 20% to 80% non-condensing
•
Temperature: 60° F to 95° F (15° C to 35° C)
Electrical requirements
•
The external power supply is rated at 100-240 VAC, 50-60 Hz,
1.8 amp. (It adjusts to any power within this range.)
•
Single phase, 3-wire, grounded receptacle only.
Physical requirements
•
The printer weighs less than 11.5 pounds (5.3 kg). The weight
depends on the supplies and options installed.
•
Printer dimensions are 21.5 inches (546 mm) long and 7.8
inches (198 mm) wide. The 100-card input hopper is 9.5 inches
(241 mm) high and the 200-card hopper is 11.9 inches (302 mm)
high.
•
The clearance required 1 inch (25 mm) at the back, 2 inches (5
cm) on the left side, and 10.5 inches (267 mm) above the printer
latch to open the cover.
Do not use the printer in a dirty environment. Do not use the printer
in a closed compartment. Do not block air flow around the printer.
9.5”
11.9”
10.5” (for cover)
7.8”
2”
1”
21.5”
Содержание SP55 Plus
Страница 1: ...SP55 Printer Guide 554733 001 August 2004...