DataCard CR825, Инструкция по установке и руководство администратора

Страница: 115 / 140

CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide 99
Supply Storage Guidelines
Follow these guidelines when storing ink ribbon or retransfer film rolls:

Store supplies in their original packaging until you are ready to use them.

Select a location away from direct sunlight, with a temperature between 50°F and 80°F
(10°C and 27°C) with a maximum of 30% to 70% relative humidity.

Do not store supplies in direct sunlight or high humidity locations.

Do not store supplies near heating ducts or blowers.

The supplies maintain their quality for about one year. For optimal card quality, purchase and
store quantities that you can use in less than a year.

The ink ribbon, retransfer film, and card stock might require secure storage and tracking.
Follow your policy for storing and tracking the supplies used to make cards.

Supply rolls must be at room temperature when they are installed in the printer and used. If
supplies are stored in a cooler environment than the printer, allow supplies to reach room
temperature before using them.

If the printer will not be used for an extended period of time, remove supplies from the
printer and store them.