Data Video SE-650, Инструкция по эксплуатации

Страница: 33 / 41

33
4.4 Loading the Clip for Stinger Transition Effect
The SE-650 allows you to generate the stinger transition effect. To do this, the user should first load
the clip saved on the machine to the
Still 2 window of the Multiview screen first. Please follow the
steps outlined below to load the clip.
1. Press the MENU button to open the OSD menu on the Multiview display.
2. Move to the User Mems menu option as shown below.
User Mems Load Mem Memory 13 Load
Save Mem Memory 13 Save
Load Clip Load Clip 0
Thumbnail
Picture - 1
Thumbnail Picture
Thumbnail
P 1
3. In the Load Clip sub-option, first select the clip that you would like to load. The Clip Preview is
shown in the row right below the Load Clip row.
4. Select
Load
to load the clip to the
Still 2 window
. The load progress prompt “
Loading Clip
XX/XX ... ” will appear. Once loaded, the previously displayed video or image will be replaced.
Note: The load process can take up to tens of seconds.
5. To enable the Clip or Stinger transition mode, please press the
MIX
and
WIPE
buttons at the
same time.
4.5 Importing the Clip for Stinger Transition Effect from the PC
On the SE-650, you will be able to add a clip between sources. Besides using the existing clips on the
machine, you are also allowed to import your own clip (a series of bmp/png files) to the SE-650 from
the PC on the SE-1200 MU User Interface. Please download the SE-1200 MU Controller Software
installation package from Datavideo’s official website.
• First connect the SE-650 to a Windows computer using an RJ-45 Ethernet cable.
• Since the SE-650 has a default IP address of 192.168.1.101 so the computer is given the IP settings
that match the same IP range as the switcher.
• Turn on the Windows computer and manually set the IP to 192.168.1.X within the Windows
Network and Sharing Centre
.
• Now install the SE-1200 MU controller software to the computer.
• After installation, click and open the user interface as shown below.