2
Client Setup Utility:
Is an editor used to create or open an
autoconfig.mia
file. This file is used to update the MP-1000 client’s
setup values. Save the autoconfig.mia file into a CF card, then fit this into an MP-1000 and power on. The
MP-1000 will show an “Auto Updating” message and then re-start again with the new settings.
IP or Hostname:
Type in static IP for local LAN server or hostname for remote set Example: 192.168.1.100
or
www.test.com
Port:
default is 5021. If 5021 is already used on the existing network, then change to different number.
Make sure to change to the same port # in the MP-1000 setup, MP-1000 Administration Tool and any
router’s port forwarding settings.
Client Account Name and Password
: Type in MP-1000’s unique user name and password for IP network
set up. After the MP-1000 client powers up and logs into MP-1000 Administration Tool the PC/Server will
show the MP-1000 client in its matching user defined group or the default home group.
DHCP or Static IP:
Select Dynamic IP if using a router/existing network or fixed static IP.
Time Zone
: Select your local GMT time zone.
Daylight Saving
: Check will add one hour to the current time set up.
Reboot time
: When this time is reached the unit will stop playing files and reboot itself so that the latest
playlist or settings can be downloaded from the network or server.
Device On
: When this time is reached the unit will start playing files from the CF card according to the
latest settings or playlist.
Device Off
: When this time is reached the unit will stop playing files and wait for further commands or a
Device On time to be reached.
Video Output
: select S-Video(including Composite video), VGA, YPbPr output. [
Note:
]You can also use
the “Video mode” key on RMC-160 remote control to switch between outputs.
