INTERCOM TALK BACK SYSTEM
8
ITC-100SL Belt Pack
XLR Connection
Connects the ITC-100SL to the
ITC-100 Base Unit. Power, tally
and bi-directional audio are all
carried through the same CB-3
cable.
Call Button
Sends a paging message to the
ITC-100 Base Unit. The channel
button will flash orange and there
will be an audible tone, each
time the button is pressed.
Bi-Color Tally LED
Illuminates RED when the
channel is LIVE and AMBER
when the channel is CUED
Talk Button
O p e n s u p t a l k b a c k
communication with the ITC-100
Base Unit, and any other active
channels.
Volume Control
Adjusts the volume of the
headphones.
BASE
TO
MA
STER
U
N
IT
TALLY
TALK
VOL
OFF
MIC/
HEADPHONE
EXT
TALLY
LED
POWER
CALL
Mic / Headphone Socket
The ITC-100SL has both a 3.5mm
and 2.5mm Mic / Headset socket.
A standard 3.5mm Mic / Headset
can be used, or a Motorola type
2.5mm Mic / headset could be
used if preferred.
ExternalTallyLEDSocket
An external tally display (TD-2)
can be connected to the ITC-100SL.
This enables the tally light to be
positioned in a more convenient
place, such as on top of the
camera. When the channel is LIVE
the LED will be RED, and when
the channel is CUED the LED will
be AMBER.
N.B. The Tally LED on the ITC-
100SL will continue to operate as
normal when a TD-2 has been
added.
Power LED
The Power LED indicates when
the channel is active. If the
operator has opened the channel
by pressing the channel button
1 ~ 8, or by pressing ALL then the
LED will light up.
N.B. The tally indicator lights will
continue to work even when the
Power LED is not on, and the
channel is not active.
XLR Connection
TOP
MIC/
HEADPHONE
VOL
POWER
EXT
TALLY
LED
TALK
TALLY
OFF
ITC-
100S
L
Bi-Color Tally LED
Volume Control
Mic/ Headphone
Socket
Talk Button
EXT Tally LED
Socket
Power LED
SIDE
CALL
Call Button
