Data-Tronix DT-IPTV-QAM-12C-SD Скачать руководство пользователя

Страница: 16 / 19

NACE: 610-429-1511 | [email protected] | www.datatronix.biz | DT-IPTV-QAM-12C-SD Manual v1.0 Page 16

Administration

Reboot

Use the Reboot command button to reboot the device.
Note: Any unsaved changes will be lost.

Reset to Default

Use the Reset to Default button to reset all parameters to original factory settings.

Saving your configuration files

We highly recommend you save your configuration files.

Simply

Select

the

“Backup”

button

and the config files will be saved to your computer.

Backup

We highly recommend saving your device’s setting.

1. Select

Administration.

2. Select

Backup from the menu.

3. Locate and name

file for future use.

Restore/Upload saved file configurations

1. Select

Administration.

2. Select

“Choose file” menu.

3. Locate

the required file to be imported.

4. Select

“Upload” to import the selected file into the device.

Remember to save and backup any and all changes.

Содержание DT-IPTV-QAM-12C-SD




















Результаты поиска

Содержание DT-IPTV-QAM-12C-SD

Отзывы:

Похожие инструкции для DT-IPTV-QAM-12C-SD

Бренды по названию

Популярные бренды

Data-Tronix DT-IPTV-QAM-12C-SD, Руководство пользователя и инструкция по установке

Результаты поиска

Содержание DT-IPTV-QAM-12C-SD

Отзывы:

Похожие инструкции для DT-IPTV-QAM-12C-SD

Бренды по названию

Популярные бренды