Data Translation DT9837, Руководство пользователя

Страница: 52 / 150

Chapter 4
52
If you want to rename your device, do the following:
a. Click the Row Selector button for the device.
b. Click the IP address or module name in the Name column to highlight it and enter a
meaningful name to represent each available device.
5. If you are using multiple devices, you must configure one device as the clock and trigger
master, as follows:
a. Click the Row Selector button for the device that you want to be the clock and trigger
master.
b. For the clock and trigger master device, check the box under the Master column .
6. (Optional) If you want to remove a device from list of selected devices, click the Row
Selector button for the device, and then click
Remove .
7. Once you have added all the devices that you want to use with the application, click OK .
The latest state is saved and used when the application is next run; the interface of the QuickDAQ
application is displayed.