Data Translation DT351, Руководство по началу работы

Страница: 15 / 52

Preparing to Use a DT351 Board
7
2
2
2
2
2
2
2
2
2
Unpacking
Open the shipping box and remove the wrapped DT351 board.
Verify that the following items are present:
• DT351 board,
• Data Acquisition OMNI CD.
If an item is missing or damaged, contact Data Translation. If you are
in the United States, call the Customer Service Department at (508)
481-3700. An application engineer will guide you through the
appropriate steps for replacing missing or damaged items. If you are
located outside the United States, call your local distributor, listed in
your Data Translation Product Handbook.
Once you have unpacked your function module, check the system
requirements, as described in the next section.
CAUTION!
Keep the board in its protective antistatic bag until you are
ready to install it; this minimizes the likelihood of electrostatic
damage.