Data Translation DT330 Series, Руководство по началу работы

Страница: 6 / 60

About this Manual
vi
• Chapter 3 , “Installing the Board and Loading the Device Driver,”
describes how to install the DT330 Series board, attach the STP68
or STP68-DIN screw terminal panel to the board, and load the
DT330 Series Device Driver.
• Chapter 4 , “Wiring Signals,” describes how to wire signals to a
DT330 Series board.
• Chapter 5 , “Verifying the Operation of a DT330 Series Board,”
describes how to verify the operation of a DT330 Series board
with the Quick Data Acq application
• Appendix A , “Using Your Own Screw Terminal Panel,” describes
additional considerations to keep in mind when designing your
own screw terminal panel for use with a DT330 Series board.
• An index completes this manual.
Conventions Used in this Manual
The following conventions are used in this manual:
• Notes provide useful information that requires special emphasis,
cautions provide information to help you avoid losing data or
damaging your equipment, and warnings provide information to
help you avoid catastrophic damage to yourself or your
equipment.
• Items that you select or type are shown in bold.
•
Courier font
is used to represent source code.