Data Translation DT3152-LS, Руководство по началу работы, Страница: 46 / 84

Chapter 5
36
10. Follow the steps on page 40 to add the new DT3152-LS board to
the DT3152-LS Device Driver configuration.
After Windows 95 (Version 4.00.950 or 4.00.950a) Has
Started
To install the DT3152-LS Device Driver after version 4.00950 or
4.00.950a of Windows 95 has started, perform these steps:
1. Open the Control Panel.
2. Double-click System .
The System Properties dialog box appears.
3. Click the Device Manager tab, then click View devices by type
.
4. Double-click Other devices .
A list of unknown hardware appears.
5. Click PCI Multimedia Video Device , then click Remove .
The Confirm Device Removal dialog box appears.
6. Click OK to remove the device.
7. If multiple PCI Multimedia Video Devices are installed, repeat
steps 3 to 6 to remove all PCI Multimedia Video Devices.
8. Click Refresh .
The New Hardware Found dialog box appears.
9. Click Driver from disk provided by hardware manufacturer ,
then click OK .
The Install From Disk dialog box appears.
10. Insert the Imaging OMNI CD-ROM into the CD-ROM drive.
11. Click Browse , browse to x:\DRIVERS\DT3152LS\Win95
(where x is the letter of your CD-ROM drive) , then click OK .
12. When the files have been copied, remove the CD-ROM from the
CD-ROM drive.
You are prompted to restart your system.